E6000 is great for building and repairing RC models. whether it’s foam planes and wings, or flexible plastic tiny whoop frames, it just works!
Want to know more about other tools for building RC planes and wings?
E6000 is widely available. It comes in 15mL, 50mL and 110mL tubes for under $7! 15mL is probably enough for repairing broken tiny whoop or other micro quad plastic frames. But if you want to build wings and planes, get the bigger 110mL. I used about 20mL just to build the S800.
The glue tube has a very fine integrated metal nozzle which is awesome for filling glue in tiny holes and gaps. It’s perfect for fine repairing but might be annoying if you want to apply a large amount at once and it takes some patience. The cap has a pin that inserts into the nozzle so it never gets blocked from drying.
The E6000 glue itself is a clear, viscous liquid, and dries semi clear. It’s runnier than goop glue, but works just as well as goop glue. I use them instead of hot glue for building foam wings because it gives me more time to position the parts before it cures.
The official instruction suggest to use it on smooth surfaces, but this glue is so flexible it moves into cracks and irregular surface just fine. It sets semi-stiff with some degree of flexibility, great for foam joints as well as flexible plastic micro quad frames.
It takes about 15 to 20 mins to dry completely I’d say. For foam planes, I normally leave them overnight just in case.
When dealing with E6000, you might want to wear disposable gloves. They are not nice when you get it on your hands and hair. And avoid getting it on your clothes, it will most likely ruin your favourite t-shirt!