The new TX16S from Radiomaster looks highly similar to the Jumper T16 at first glance, but it has some improvements and better features. Here is a sneaky peak of the specs before getting it for in-depth review.
The Radiomaster TX16S is basically the Jumper T16. Hobbyporter told me the two companies worked together on the T16 in the past, but later went their separate ways. And now Radiomaster released their own version of the radio.
Most importantly the TX16S is rumoured to be $40 cheaper!
- Date: TBC
- Prices Not Confirmed
- Non-Hall Gimbal version: $100
- Hall Gimbal version: $130
- Hall Gimbal + Crossfire Micro TX: $190
I will come back and update where you can buy this radio.
- Built in USB-C Charging
- USB-C Data/simulator port
- External SD card slot (SD card included)
- Two external UART ports for updates and DIY
- Improved menu navigation with Page back and forward
- Better housing design with improved grip ergonomics
- Better switch quality and placement design
- Better sliders with good center feedback
- Full Size HALL gimbal with CNC Aluminum plate
- Official OpenTX support
- Built-in Multi-protocol module
- Improved speaker circuit (no buzzing noise)
- Included EPP carry box
- Size: 180x190x58mm
- Weight: 820g including 2×18650 batteries
- Input Voltage: 7V – 8.4V DC
- Battery Support: 2S LiPo or 2×18650 (holder provided)
- Operation Current: 350mA excluding external module
- STM32 F429 MCU
- 4.3″ 480×272 Color Screen
- Rolling wheel menu button
- Full Size Hall Gimbal
|T16 Pro Hall||TX16S|
|USB Port||Mini USB||USB-C|
For other differences please keep reading.
The TX16S has a black matte finish instead of silver.
The most welcome improvement in the TX16S from the T16 is probably the USB port and built-in charging feature. USB-C is far more common than the old Mini USB port in the T16 today. And the built-in charging feature means you don’t have to remove the battery from the radio in order to charge it.
Radiomaster claims the TX16S is officially supported by OpenTX too, just like the T16. But as far as I know, they are still working with OpenTX team on the firmware, and it won’t use the same firmware as T16.
The TX16S is fully compatible with TBS Crossfire, just like the T16 according to Radiomaster.
Although the TX16S has a built-in multi-protocol module just like the new Jumper T16 Pro, the antenna on the TX16S doesn’t seem to be removable, at least that’s the case from the render image.
According to Radiomaster, they’ve improved the switches and button locations slightly from the T16 for better ergonomics.
The SD card slot in the TX16S is located at the bottom of the radio for easy access. On the T16, it’s inside the battery bay. I don’t think it makes much of a difference since we normally access the SD card in bootloader mode without taking it out anyway.
The TX16S offers two “external UART” ports which are missing on the T16. Radiomaster said you can use them for “updates and DIY”, but I am not sure how useful these are yet.
The battery bay in the TX16S seems to be bigger than the T16, and therefore you might be able to fit a larger 2S LiPo battery. But for 18650 Li-Ion, you can only use two.
The TX16S has an extra menu button for “Page Back” and “Page Forward” for “improved menu navigation”. I feel like it’s a little unnecessary to be honest. In the T16 you press the Page button for “Page Forward”, and hold it slightly longer for “Page Back”, and I never felt the need to use an extra button. Maybe I will like this after trying it, who knows 🙂